Hyper Crash (Konami 1987-version C+D) VLM5030 speech
====================================================


NOTES:

* The VLM5030 speech rom (790-c08.j4) on the Hyper Crash board is a
  Fujitsu 27C256 EPROM = 32k (0x8000), but the PCB info says that the
  board is wired for a 27C128 and the top half of the EPROM is blank, so
  i added to the ROM_LOAD a ROM_CONTINUE to load the second half to $0000.

* The volume for the VLM5030 is 60% and must be higher, because the other
  sound chips are too loud. To better hear the speech you must set
  all other volumes lower.

* VLM5030 speech for Hyper Crash:
 
  (Booting)     Five
  (Game start)  Five, Four, Three, Two, One...Go
  (Car Jump)    Yeah
  (Game End)    Game Over

  




SOURCE: drivers\nemesis.c


Replaced ROM_START's( hcrash + hcrashc ) with this ones...


ROM_START( hcrash )
	ROM_REGION( 0x140000, REGION_CPU1, 0 )    /* 64k for code */
	ROM_LOAD16_BYTE( "790-d03.t9",   0x00000, 0x08000, CRC(10177dce) SHA1(e46f75e3206eff5299e08e5258e67b68efc4c20c) )
	ROM_LOAD16_BYTE( "790-d06.t7",   0x00001, 0x08000, CRC(fca5ab3e) SHA1(2ad335cf25a86fe38c190e2e0fe101ea161eb81d) )
	ROM_LOAD16_BYTE( "790-c02.s9",   0x40000, 0x10000, CRC(8ae6318f) SHA1(b3205df1103a69eef34c5207e567a27a5fee5660) )
	ROM_LOAD16_BYTE( "790-c05.s7",   0x40001, 0x10000, CRC(c214f77b) SHA1(c5754c3da2a3820d8d06f8ff171be6c2aea92ecc) )

	ROM_REGION( 0x10000, REGION_CPU2, 0 )    /* 64k for sound */
	ROM_LOAD( "790-c09.n2",   0x00000, 0x08000, CRC(a68a8cce) SHA1(a54966b9cbbe37b2be6a2276ee09c81452d9c0ca) )

	ROM_REGION( 0x08000, REGION_SOUND1, 0 )  /* VLM5030 data data */
	ROM_LOAD( "790-c08.j4",   0x04000, 0x04000, CRC(cfb844bc) SHA1(43b7adb6093e707212204118087ef4f79b0dbc1f) )
	ROM_CONTINUE(             0x00000, 0x04000 ) // Board is wired for 27C128, top half of EPROM is blank.

	ROM_REGION( 0x20000, REGION_SOUND2, 0 )  /* 007232 data */
	ROM_LOAD( "790-c01.m10",  0x00000, 0x20000, CRC(07976bc3) SHA1(9341ac6084fbbe17c4e7bbefade9a3f1dec3f132) )
ROM_END

ROM_START( hcrashc )
	ROM_REGION( 0x140000, REGION_CPU1, 0 )    /* 64k for code */
	ROM_LOAD16_BYTE( "790c03.t9",    0x00000, 0x08000, CRC(d98ec625) SHA1(ddec88b0babd1c538fe5055adec73b537d637d3e) )
	ROM_LOAD16_BYTE( "790c06.t7",    0x00001, 0x08000, CRC(1d641a86) SHA1(d20ae01565d04db62d5687546c19d87c8e26248c) )
	ROM_LOAD16_BYTE( "790c02.s9",    0x40000, 0x10000, CRC(8ae6318f) SHA1(b3205df1103a69eef34c5207e567a27a5fee5660) )
	ROM_LOAD16_BYTE( "790c05.s7",    0x40001, 0x10000, CRC(c214f77b) SHA1(c5754c3da2a3820d8d06f8ff171be6c2aea92ecc) )

	ROM_REGION( 0x10000, REGION_CPU2, 0 )    /* 64k for sound */
	ROM_LOAD( "790c09.n2",    0x00000, 0x8000, CRC(a68a8cce) SHA1(a54966b9cbbe37b2be6a2276ee09c81452d9c0ca) )

	ROM_REGION( 0x08000, REGION_SOUND1, 0 )  /* VLM5030 data data */
	ROM_LOAD( "790c02.j4",   0x04000, 0x04000, CRC(cfb844bc) SHA1(43b7adb6093e707212204118087ef4f79b0dbc1f) )
	ROM_CONTINUE(             0x00000, 0x04000 ) // Board is wired for 27C128, top half of EPROM is blank.

	ROM_REGION( 0x20000, REGION_SOUND2, 0 )  /* 007232 data */
	ROM_LOAD( "790c01.m10",   0x00000, 0x20000, CRC(07976bc3) SHA1(9341ac6084fbbe17c4e7bbefade9a3f1dec3f132) )
ROM_END



(c) June 2005  M.A.S.H.